The Importance Of Water Recycling Environmental Sciences Essay

The Importance Of Water Recycling Environmental Sciences Essay The aim is to review the importance of water recycling and the unending effects of hard water all round us. Objective is to achieve a clear understanding of the present and future benefits of water recycling and why it is still practised today. A number of up-to-date water recycling tehnologies are studied to an extent. The perpetual need for the various solutions in softening hard water is looked into retrospectively carefully highlighting typical problems likely to occur. Water is a common substance that is essential to all forms of life. A massive 75 percent of planet earth is covered in water and is mostly found in oceans and large water bodies. Of this total volume of water, 97 percent is saltwater and 3 percent is freshwater. 69 percent of this freshwater is glacial and 31 percent is groundwater. For billions of years, earth has been reusing water over and over again in a natural process called the hydrologic cycle (BENEFITS OF RECYCLING., 2010). This cycle is the path water takes as it circulates from the land to the sky and back again. 1.1 Water Recycling Water recycling is a natural process which relies on technology to speed up such projects. It is sometimes described as unplanned and planned (GREYWATER RECYCLING SYSTEMS., 2010). By unplanned, this means for example, when cities draw their water supplies from rivers that receive waste water upstream from these cities. Water from these rivers has been reused, treated and piped into the water supply a number of times before the last downstream use withdraws the water (GREYWATER RECYCLING SYSTEMS., 2010). However, that of planned water recycling projects is developed with the aim of reusing a recycled water supply. Recycled water is waste water that has been treated and processed for useful nonpotable purposes such as agricultural, landscape, public parks, and golf course irrigation (GREYWATER RECYCLING SYSTEMS., 2010). Other nonpotable applications include cooling water for power plants and oil refineries, industrial process water for facilities such as paper mills and carpet dyers, toilet flushing, dust control, construction activities, concrete mixing, and artificial lakes (GREYWATER RECYCLING SYSTEMS., 2010). In an industrial facility, water is recycled and reused onsite used in cooling processes for example (GREYWATER RECYCLING SYSTEMS., 2010). Although most water recycling projects have been developed to meet the demands of nonpotable water, a number of them use recycled water indirectly for potable purposes (GREYWATER RECYCLING SYSTEMS., 2010). These projects include recharging ground water aquifers and augmenting surface water reservoirs with recycled water (OASIS DESIGN., 2009). Recycled water can be spread or even injected into ground water aquifers to augment ground water supplies, and to prevent salt water intrusion in coastal areas. Environmentally, water recycling provides tremendous benefits. Water recycling can help us find ways to reduce the diversion of water from sensitive ecosystems by providing a supplementary source of water. The lack of sufficient water flow, as a result of diversion for agricultural, urban, and industrial purposes, can cause impairment of water quality and ecosystem health for plants, wildlife, and fish which depend on adequate water flow to their habitat for sustenance and reproduction ( OASIS DESIGN., 2009). For streams that have been dried from water diversion, recycled water may be used to build these habitats (GREYWATER RECYCLING SYSTEMS., 2010). Water flow can be augmented with recycled water to develop and sustain the aquatic and wildlife habitats (GREYWATER RECYCLING SYSTEMS., 2010). 1.2 GreyWater Greywater is water that has been used domestically (from baths, showers, clothes washers, and wash-hand basins) except for water from toilets (GREYWATER RECYCLING SYSTEMS., 2010). Greywater takes up 50 80% of household wastewater (OASIS DESIGN., 2009). Wastewater produced by toilets is called black water (OASIS DESIGN., 2009). However wastewater from kitchen sinks and dish-washers is also considered to be black water as well due to the presence of organic contents (OASIS DESIGN., 2009). The clearest purpose of recycling domestic grey water is that it replaces potable water use (OASIS DESIGN., 2009). 2 BUILD-UP OF TOXIC ORGANIC POLLUTANTS FROM RECYCLING In water treatment, a wide range of chemicals are added in excess due to poor operation or accidents (GRAY N. F., 2005). However, most of these chemicals are discharged with the finished water product due to the nature of the processes themselves. These include iron, aluminium, and organic compounds used as coagulates, such as polycrylamide (GRAY N. F., 2005). These chemicals result in odour and discolouration in the water as well as poor taste. Furthermore, the new Drinking Water Directive sets limit values for all these compounds. Chemicals such as chlorine and fluorine are added intentionally to protect the public from pathogens and teeth decay respectively (GRAY N. F., 2005). 3 THE NEGATIVE PUBLIC PERCEPTION OF DRINKING SEWAGE WATER The increasing concern of the public is reflected by a large rise in the sales of bottled water and home treatment systems (GRAY N.F., 2008). The view of reusing sewage water for the purpose of drinking water ignorantly puts people off now and again. However, the knowledge of water recycling plays a big role here so educating the consumer about water quality and the regulatory functions of water undertakers is mandatory (GRAY N.F., 2008). All water is reused and with the system of treatment in place, sewage water can be drinkable. The use of chlorine in water treatment is a major source of complaint with consumers (GRAY N.F., 2008). The prevailing reasons for boiling water, buying bottled water or the use of home treatment systems are over an improvement in taste and health concerns. There is a strong belief that bottled water is safer and purer to drink which unfortunately is not always true. The media also plays a role in the influence of attitudes towards water and the assessment risk (GRAY N.F., 2008). 4 REGULATIONS In protecting public health, conditions and regulations have been made to allow for the safe use of reclaimed water. Reclaimed water often provides a vital water supply and fertilizer source (METCALF EDDY., 2003). For most developing countries, the greatest concern with the use of wastewater for irrigation is that untreated or treated wastewater can possess quite a number of intestinal nematodes (e.g., Ascaris and Trichuris species and hookworms) and bacterial pathogens which are often difficult to control (METCALF EDDY., 2003). The health of the general public consuming farm produce that have been contaminated by the wastewater infected by these viral and bacterial agents can deteriorate over time. The world health organisation suggest that irrigation of farm produce prone to be eaten uncooked, sports fields, and public parks should be irrigated with wastewater dealt with stabilization ponds (METCALF EDDY., 2003). From country to country, regulations in reusing water and wastewat er vary. In England and Wales, Drinking Water Inspectorate control the standard of drinking water provided (GRAY N. F., 2005). However, the quality of the water is the privatised water companies responsibility (GRAY N. F., 2005).These responsibilities are regulated by the Office of Water Services and it also controls the price of water before hitting the market. The Environment Agency for England and Wales is responsible for controlling water pollution, regulating waste and manage integrated pollution control (IPC) licensing (GRAY N. F., 2005). It also has the duty to issue licenses for water control functions, promote the conservation and enhancements of freshwater to promote the recreational use of freshwater, to improve and develop fisheries and regulate them, to issue flood warnings and the provision of defences to reduce the risk of sea and river flooding, the issuing of land drainage consents and many other tasks (GRAY N. F., 2005). The Agency points out water protection zones , protects groundwater and sets the objectives for water quality (GRAY N. F., 2005). 5 PRECAUTIONS Dont store grey water Grey water should be used within 24 hours before the build up of bacteria develops. After this period, it is on its way to becoming septic, that is, black water (LETS GO GREEN., 2009). Avoid contamination and contact Identify grey water plumbing by labelling it. The use of gloves is vital when in contact with grey water filters or anything that has come in contact with it (LETS GO GREEN., 2009). Use only grey water that is fairly clean to start with. If otherwise, it should be diverted to a sewer or septic system (LETS GO GREEN., 2009). Microorganisms on consumable goods Untreated grey water possesses some microorganisms which affect lawns, or fruits and vegetables that are eaten raw (e.g., strawberries, lettuce, carrots) to an extent (LETS GO GREEN., 2009). Contamination of surface water Grey water should be disposed of properly either underground or in a mulch (a mulch is a covering made up of rotten vegetable matter which prevents evaporation and soil erosion). The addition of grey water to an already soaked soil should be avoided (LETS GO GREEN., 2009). 6 DESALINATION Desalination involves removing dissolved minerals from aquatic bodies to create drinking water (CITY OF RYDE, 2009). 15-50% of water is recovered with the other portion being brine (CITY OF RYDE, 2009). A few technologies have been produced for the execution of this process, including the best known and common membrane process is the reverse osmosis (CITY OF RYDE, 2009). http://www.esru.strath.ac.uk/EandE/Web_sites/98-9/offshore/ro.gif Figure 2: Diagram showing osmotic and reverse osmotic flow (Source: Courtesy of FWPBDP., 2010) Countries which do not have the advantage of continual fresh water supplies, competition for fresh water continually soars (TENE A. 2010). Israel is regarded pioneer in the area of desalination (TENE A. 2010). Following the water crisis in Israel, the state of water economy improved to an extent that even during harsh drought years, the water economy will continue to flourish since the water in the sea would not be running out anytime soon (TENE A. 2010). This sea water is pumped to as much volume is required and the final desalinated water is supplied as necessary. Another type of separation technique is the evaporation process (PEREIRA H.C. 1973). Developing economies such as California have warm climates of high evaporation rates (PEREIRA H.C. 1973). Its primary water resource is the sea where the evaporation process is practised. It is an effective alternative to water recycling in water poor regions (PEREIRA H.C. 1973). 7 FUTURE OF WATER RECYCLING Recycling is generally vital to our planets future. The rate at which the earths highly valued resources are been consumed is taking a rapid turn and many of these resources are not renewable (U.S. EPA., 2009). Recycling as a process takes considerably less energy to reuse an existing product than to source and make one from scratch (U.S. EPA., 2009). Water recycling has certainly established beyond doubt to be effective and resourceful in developing a new and reliable water supply. Nonpotable reuse is a widely accepted practise that will continue to expand (YOSHIKAWA N., 2006). Advances in wastewater treatment technology and health studies of indirect potable reuse will become common soon (YOSHIKAWA N., 2006). As water and environmental needs becomes urgent, water recycling would play a greater role in our long-term water supply (U.S. EPA., 2009). 8 WATER RECYCLING TECHNOLOGY The type of wastewater is essential for determining the kind of treatment plant and technologies to employ. Wastewater primarily arises from water usage by residential, commercial and industrial institutions including groundwater, surface water and storm water as shown in Figure 3. Figure 3: Sources of Wastewater (Source: Courtesy of ESCWA., 2003). Typical examples of water recycling systems in the domestic or industrial field are flotation and sedimentation, of which both are relevant to the chemical industry. 8.1 Flotation Flotation is a unit process used to remove solid or liquid from any form of liquid by releasing fine gas, usually air bubbles into it (ESCWA., 2003). The gas bubbles would stick to the liquid or would get trapped in the particle structure of the suspended solids, raising the floaty force of the particle and gas bubbles put together (ESCWA., 2003). Particles having a higher density than the liquid would be able rise. Flotation is used to remove suspended matter and to concentrate biological sludge in wastewater treatment (ESCWA., 2003). Flotation has an advantage over the sedimentation process in that; very minute and light particles are easily removed in a quicker time frame (ESCWA., 2003). Table 1: Data of Flotation Methods Process Brief Descriptions Dissolved Air Flotation Wastewater is subjected to the pressure of several atmospheres while air is introduced into it. The pressure then returns to atmospheric level, allowing the air to be released as small bubbles after a short time. These bubbles which stick to the suspended matter where it is removed by a skimming device. Air Flotation By the application of a revolving impellers or through diffusers, gas is passed into the liquid directly at atmospheric pressure Vacuum Flotation Wastewater is saturated with air. With the application of a partial vacuum, the dissolved air results in escaping as minute bubbles where they form a scam blanket. This blanket is removed by a skimming device. Source: Courtesy of ESCWA., 2003. Figure 4: A typical Flotation unit (ESCWA., 2003). 8.2 Sedimentation Sedimentation is a widely used unit operation in water and wastewater treatment (ESCWA., 2003). It involves the gravitational settling of suspended solids in a mixture usually water (ESCWA., 2003). These suspended solids are removed from suspensions by allowing it gravitate to the floor of a tank to form a sludge under near still conditions (ESCWA., 2003). This tank is referred to as a clarifier (ESCWA., 2003). It comprises of three main designs. They are; Horizontal flow clarifiers They can either be rectangular, square or circular in shape. The flow in rectangular clarifiers is rectilinear and parallel to the long axis of the basin. Furthermore, the water flows radially from the centre towards the outer edges in circular clarifiers. The clarifiers are usually made up of steel or reinforced concrete (ESCWA., 2003). Solid contact clarifiers They get solids into contact with a suspended layer of sludge near the bottom that acts as a blanket. The solids put in cumulate and remain trapped within the sludge blanket. As the solids remain below, the liquid is able to rise upwards (ESCWA., 2003). Inclined surface basins The flow here is laminar and there is little or no wind effect. Inclined trays are used to divide the depth into shallower sections, reducing the settling times in the process (ESCWA., 2003). Figure 5: Parts of a circular clarifier (Source: Courtesy of ESCWA., 2003). 9 HARD WATER Hard water is simply referred to as water that contains more minerals than ordinary water (FREE DRINKING WATER., 2009). Water that is said to be hard possesses minerals made up of calcium and magnesium compounds (FREE DRINKING WATER., 2009). This water usually comes from aquifers and other underground sources that collect dissolved minerals from rocks (FREE DRINKING WATER., 2009). Minerals of these sought reduces the ability of soap to lather and the ease of rinsing anything being washed made difficult. On the other hand, soft water is treated water that contains only sodium ion (FREE DRINKING WATER., 2009). Figure 6: Diagram showing hard and soft water processes (Source: Courtesy of LENNTECH., 2009). 9.1 PROBLEMS WITH HARD WATER Every cleaning task from laundering and dish washing to bathing and personal care is made unreasonably difficult taking up time and energy. The quantity of hardness minerals in water would determine the soap and detergent level required for cleaning. Additional detergent would have to be added to achieve the desired goal. Dishes and glasses washed using hard water may not be totally clean possessing certain spots when dry. The same goes with clothes which may feel harsh and scratchy when worn. Furthermore, skin was led with hard water may leave the skin feeling itchy and dry certainly not a remedy for skins with conditions such as eczema (HEIDEKAMP A. J., 2005). A number of detergents have ingredients that would mix with hard water minerals leaving a white deposit on clothing, making it look faded and worn out. Heated hard water affects water-using appliances (HEIDEKAMP A. J., 2005). It forms a scale of calcium and magnesium minerals which contributes to the inefficient and costly of these appliances (HEIDEKAMP A. J., 2005). Pipes become clogged with scale that impedes water flow and would in no time require pipe replacement. When hard water is heated, calcium ions react with bicarbonate ions to form an insoluble compound called calcium carbonate which is responsible for the scaling in pipes (HEIDEKAMP A. J., 2005). This is depicted in the equation below; 9.2 SOFTEN WATER TECHNIQUES 9.2.1 Lime-Soda Ash Technique It is the most common water softening method which involves the addition of slaked lime to hard water in water plants (FREE DRINKING WATER., 2009). Lime and soda ash are used because they are readily accessible and cost effective for softening water (FREE DRINKING WATER., 2009). Non-carbonate hardness is in turn reduced by the addition of soda ash to form insoluble precipitate which is also removed by filtration. Slaked lime is used to remove calcium bicarbonate from water (FREE DRINKING WATER., 2009). In this method, the slaked lime ions react with the calcium bicarbonate to form a slightly soluble calcium carbonate. This precipitate is usually removed by allowing it settle and then filtering (FREE DRINKING WATER., 2009). Additional lime is used in removing magnesium (FREE DRINKING WATER., 2009). This treatment becomes more costly as the hardness level has to be reduced to less than 5 grains. The use of the lime-soda ash treatment in homes was farfetched because of the equipment siz e and high cost involved in running one and even owning one (FREE DRINKING WATER., 2009). 9.2.2 Ion Exchange Columns Technique Ions could either be positively or negatively charged. A positive charge ion is called a cation while a negatively charged ion is an anion. The minerals, calcium and magnesium, that result in hardness are positively charged cations (NORDEN R. L., 2010). An ion exchange water softener has three main parts; A resin tank containing small beads of synthetic resin, A brine tank, The control valve (NORDEN R. L., 2010). When using ion exchange equipment, calcium and magnesium are exchanged for sodium from the brine tank (NORDEN R. L., 2010). As water passes through the resin tank, the sodium ions are exchanged with calcium and magnesium ions (NORDEN R. L., 2010). This is because the calcium and magnesium ions have a higher positive charge than the sodium ions. As the calcium and magnesium attach themselves to the resin beads is released simultaneously into the water. After the sodium in the resin, medium is exhausted, the medium can be regenerated by the sodium from the brine tank (NORDEN R. L., 2010). People with health problems such as heart or circulation problems, or are on low sodium diets may need to avoid using the ion exchange because of the high sodium content (NORDEN R. L., 2010). It is not even recommended for watering lawns or plants due to the sodium content present. However, potassium can be used in replacing sodium but it costs more. It is highly recommended that only hot water in a h ome be softened because the hot water line and heater benefits and the rate of soap consumptions are reduced (NORDEN R. L., 2010). Another importance in using the ion exchange equipment is that, it removes traces of iron as well to an extent because it is a positively charged ion (NORDEN R. L., 2010). 9.2.3 Chemical Conditioners/Suppressants Technique Chemical conditioning involves the addition of polyphosphates (SOUTHERN WATER., 2005). This reduces the availability of calcium in the formation of deposits. This would result in the water behaving as though softening although this would be false regarding the removal of calcium. A measure of this supposed softening is that such water would need less soap or detergent to lather. The polyphosphates can easily be set up by installing a relatively cheap dispenser in the pipework that could easily treat all the water going into the property (SOUTHERN WATER., 2005). When exhausted in the dispenser, the polyphosphates usually in solid glass-like balls are added at any appropriate time frame (SOUTHERN WATER., 2005). Alternatively, using polyphosphates helps to reduce traces of lead from any lead pipework but this should not be a guaranteed reason for using this technique (SOUTHERN WATER., 2005). HARD WATER CONTAINING CALCIUM AND MAGNESIUM ENTERING SOFTNER SOFTEN WATER CONTAINING SODIUM CONCLUSION Water is reusable. A high percentage of our water is recycled and the same water has been around for a long time. In this effect, water technologies have been cleverly developed in keeping this natural tradition alive. Hard water is water that contains calcium and magnesium ions, and can be reversed by softening it thereby leaving it usable in homes and industries. It has a costly effect on most equipment in our homes and a health risk in humans. In softening hard water, the rate at which all these negative effects take its course would be minimised.

Homeschooling Pros and Cons Essay -- Home School Education Essays

Homeschooling Pros and Cons Homeschooling is a rising alternative in children’s education. As with any other major movement there have been doubts and debates as well as support and promotion for this educational approach. Homeschooling was once the norm in society before there was a public school system. But the parents involved in homeschooling feel very strongly about the positive outcomes that it has brought about in the lives and success of their children. It has once again surfaced and become popular but there are several people who question the possible negative effects this option creates. Criticism of homeschooling is vast and there are several different aspects as to why it could be detrimental to the development of a child. One such argument is that experiences of diversity are lost when students are taught in the home. They have lost the opportunity to work with peers of varying culture and social statuses in an academic environment. Such experiences are essential preparation for social and professional life outside the home. Without this training at an early age they may be at a disadvantage when forced to go out into the work force. Another reason why some people disapprove of homeschooling is that since the parents can design what is taught their children only are exposed to the parents’ views. This results in the children having limits on their ability to form their own views and ultimately forming their own unique personality and values. Also to be considered is lack of work ethic built through a structured school setting. The discipline that is learned will be used later on to maintain a steady job and allows them to become accustomed to the rigidity of professional industry. Also in the classroom children ... ...November 23, 2003, from EBSCOhost on the World Wide Web: http://search.epnet.com Ray, B. (2002). Customization through homeschooling. Educational Leadership 59(7), 50-55. Retrieved November 23, 2003, from EBSCOhost on the World Wide Web: http://search.epnet.com Reich, R. (2002). The civic perils of homeschooling. Educational Leadership 59(7), 56-60. Retrieved November 23, 2003, from EBSCOhost on the World Wide Web: http://search.epnet.com Staehle, D (2000). Taking a different path: A mother’s reflection on homeschooling. Roeper Review 22(4), 270-272. Retrieved November 23, 2003, from EBSCOhost on the World Wide Web: http://search.epnet.com Wichers, M. (2001). Homeschooling: Adventitious or detrimental for proficiency in higher education. Education 122(1), 145-151. Retrieved November 23, 2003, from EBSCOhost on the World Wide Web: http://search.epnet.com

John Stuart Mill Essay

The Indian Tax Structure is quite elaborate, with clear distinction in authority between Central, State and local governments. The taxes levied by the Central government are on income (other than tax on agriculture income which would be levied by the state government), customs duties, central excise and service tax. The State government levies Value Added Tax (VAT), sales tax in states where VAT is not applied, stamp duty, state excise, land revenue and tax on professions. Local bodies levy tax on property, octroi and for utilities like water supply, drainage etc. In the last 10 to 15 years, tax system in India has been subjected to significant reforms. The tax rates have been revised and tax laws have been modified. Since April 1, 2005 many State Governments in India have replaced the sales tax with VAT. Indian Tax Structure After Independence The period after Independence was quite challenging for the tax planners. A huge black economy set in both due to Second World War and the increase in economic activity after independence. Savings and investment were encouraged through the various taxation laws by the way of incentives. There was a need for generating huge amount of revenues to fund the economic growth of the country. The tax department took great care to plan the tax structure not only with the aspect to widen the income tax base, but also to look for alternate taxes and to eradicate tax avoidance . The department was severely tested due to the high volumes of work. Some of the prominent taxes that came into existence were: †¢ †¢ †¢ †¢ †¢ †¢ Business Profits Tax (1947) Capital Gains (1946-48 to 1956) Estate Duty (1953) Wealth Tax (1957) Expenditure Tax (1957) Gift Tax (1958). To check the growth of black money, high denomination notes were demonetized in 1946. The Income tax Act was re modified in 1961, replacing the outdated law of 1922. Income Tax Structure Post Liberalization The wave of tax reforms which started across the world in the second half of 1980’s found its way into India. As part of its policy of liberalization, India introduced tax reforms in the 1990’s. The reforms introduced in the Indian tax structure are different in comparison to other countries. The tax reforms in India took place independent of interference from any external multilateral agency unlike some other countries. But the tax reforms took place in such a way as to ensure its adherence to the prevailing International trends. During the initial stages of reforms, the restructuring of the tax structure took place with a view to increase savings and use the increased savings towards investment, to bring in equitable distribution of income and to rectify the disparities due to oligopolistic market that existed due to co existence of both private and public sector. The tax structure reform in India can be used as an example for many developing countries that are in the same path of development, due to the large size of the country and the disproportion in the socio economic condition across the country. Direct Tax Direct tax is the tax which is charged directly on the tax payer. For e. g. property tax and income tax. In other words direct tax is that tax that is deducted from one’s salary. Direct Taxation in India Direct taxation in India is taken care by the Central Board of Direct Taxes (CBDT); it is a division of Department of revenue under Ministry of Finance. CBDT is governed by the revenue act 1963. CBDT is given the authority to create and control direct taxes in India. The most important function of CBDT is to manage direct tax law followed by Income Tax department. In India the tax structure is divided amongst the central government and state government. The central government levies taxes on income, custom duties, central excise and service tax. While the state government levies tax like state excise, stamp duty, VAT (Value Added Tax), land revenue and professional tax. Local civic bodies levy tax on properties, octroi etc. Capital gains tax, personal income tax, tax on corporate income and tax incentives all come under the purview of direct tax. Direct taxes are charged on the basis of residential status and not on the basis of citizenship. The assessee are charged based upon the following factors †¢ †¢ †¢ Resident Resident but not ordinary resident. Nonresident. Direct Taxes Before Reform They had a major impact on economic policies, creation of savings and the trend of investment. There was no proportion in terms of the impact of direct taxes on the economy and there relative share in total tax revenues. The system of direct taxes was very much complex and inefficient because of the combination of high marginal rates of personal income and wealth taxation and high rates of corporate profits. The corporate tax was pretty high. It leads to large scale evasion. Members Of Parliament and Central Government Ministers get comparatively low salaries, but they are given a sitting allowance which is not taxable. Ministers, MP’s and other high ranking government officials get government allocated accommodation, where the charges are pretty less in comparison to the prevailing market rate. Growth in Direct Tax collection during the Financial Year 2008-09 Net direct tax collection during the fiscal 2008-09 stands at Rs. 338, 212 crore, up from Rs. 312, 202 crore during 2007-08, registering a growth of 8. 33 percent. Growth in Corporate Taxes was 10. 84 per cent, while Personal Income Tax (including FBT, STT and BCTT) grew at 9. 09%. Despite economic slow-down and substantial relief to noncorporate taxpayers, direct tax collections exceeded the previous year’s collection by about Rs. 26, 000 crore. Growth In Direct Tax Collection During The Financial Year 2009-2010. The net direct tax collections grew by 5. 77 per cent during the first two months of the current fiscal (2009-2010). It was Rs 24,158 crore compared to Rs 22,840 crore at the same time last year. Corporate tax grew at5. 56 per cent (Rs 8578 crore against Rs 8126 crore), while personal income tax (including FBT, STT and BCTT) grew at 5. 92 per cent (Rs 15,559 crore as against Rs 14,690 crore0. Overall refund outgo during the period increased by 26. 19 per cent (Rs 11,375 crore as against Rs 9014 crore)while refunds to non corporate taxpayers grew by 61. 7 per cent (Rs 2,149 crore against Rs 1,329 crore). Corporate Tax A company has been defined as a juristic person having an independent and separate legal entity from its shareholders. Income of the company is computed and assessed separately in the hands of the company. However the income of the company which is distributed to its shareholders as dividend is assessed in their individual hands. Such distribution of income is not treated as expenditure in the hands of company, the income so distributed is an appropriation of the profits of the company. Taxable Corporate Income The tax levied on a company’s income is based on its legal residence. Companies of Indian origin are levied tax in India, while International companies are levied tax on earnings from their Indian operations. For International companies’ royalty, interest, gains from sale of capital assets within India, dividends from Indian companies and fees for technical services are all treated as income arising in India. Tax On Distributed Profits Till 1997, a company was not required to pay any income tax on the amount of dividends declared, distributed or paid by such company. But such dividend was included in the income of the shareholders under the head â€Å"income from other sources†. The finance act 1997 brought about changes to the rule. A) Tax On Distributed Profits Of The Domestic Company The domestic company would be required to pay additional income tax on any amount declared, distributed or paid by such company by way of dividend (be it interim or otherwise) on or after 1-06-1997,be it from current or accumulated profits. Such additional income tax shall be payable @ 10 per cent of the amount so distributed. Even if no income tax is payable by the company on it total income, the additional tax would have to be paid. B) Exemption Of Dividend In The Hands Of Shareholders In view of the income tax now payable by the domestic company, any dividends declared, distributed or paid by such company, on or after 01-06-1997 shall be exempt in the hands of the shareholders. Time limit for deposit of additional income tax: Such additional tax will have to be paid by the principal officer of the domestic company within 14 days from the date of: a) Declaration of any dividend. b) Distribution of any dividend. c) Payment of any dividend, whichever is earlier. Additional income-tax is not allowed as deduction: The company shall not be allowed any deduction on account of such additional income tax under any provisions of the income tax act. Indian Budget 2008 Indian Corporate Taxation Minimum Alternate Tax To wipe out the ambiguity on adjustments relating to tax entries in the profit and loss account, it is proposed that the â€Å"book profits† be increased by an amount of DDT paid, amount of deferred tax paid and deferred tax provision debited to Profit and Loss Account. Dividend Distributing Tax In order to overcome the domino effect of DDT, it has been suggested that any dividend received by a domestic company (C1) during any financial year from its subsidiary (C2) shall be allowed to be deducted from dividend to be declared/distributed/paid by C1, to calculate DDT, if the dividends so received by C1 had been scrutinized to payment of DDT by C2. At the same time C1 must not be a subsidiary of any other company. Business Income The Budget 2008 has proposed have a weighted deduction of 125% with respect to any sum paid for scientific research to a domestic company doing scientific research and development. To remove multiple deductions, it has been proposed some Indian companies incurring the expenses would not be able to use the weighted deduction of 150 per cent as prescribed under the provisions of the Act. Income Tax In India Income tax in India is levied by the Central government and is monitored and controlled by Central Board OF Direct Taxes under Ministry of Finance in allay with the provisions of the Income Tax Act. Income earned in a given financial year is subject to tax as per the rates prescribed for that year. A financial calendar is from April 1 to March 31 of the following year. India has adopted the residential form of tax system. It means tax payers will be divided into residents or non residents. A tax payer can also be classified as ordinary residents. Residential Status An individual is resident in India if he is in India in the tax year for: †¢ †¢ †¢ 182 days or more; or 60 days or more (the period of 60 days stands changed to 182 days or more for Indian citizens or persons of Indian origins on a visit to India; and also for citizens of India who leave India for employment abroad as member of a crew of an Indian ship) during the tax year, and an aggregate of 365 days or more during the four years preceding the tax year. An individual who does not satisfy the above conditions is a non-resident. A resident is â€Å"not ordinarily resident† in India in any tax year if he: †¢ †¢ †¢. Has been â€Å"non-resident† in India in nine out of the 10 previous years preceding that year: or Has during the previous seven years, preceding that year, been in India for a total period of 729 days or less. Taxability based on status Taxability Based On Status Residential Status Indian Sourced Income Foreign Sourced Income Resident Taxable In India Taxable In India Resident but not ordinarily resident Taxable In India Not Taxable In India Non resident Taxable In India Not Taxable In India Heads Of Income Income can be divided into five categories. The income that falls within the tax component is disclosed in line with rules for a particular head and then cumulated to determine the aggregate income to be taxed. But losses under certain categories cannot be cumulated with income gained under other categories. Salaries: It covers those monetary gains that are obtained for services performed and would include wages, pension, fees and commission . Standard deduction is taken from the salary and the amount of deduction depends upon the income received. Income From House property: It involves income earned by renting residential and commercial property. Only two authorized deductions are allowed while calculating income. Profits And Gains From Business Or Profession: It covers monetary benefits gained from business or profession minus the permissible deductions, against the revenue earned. Capital Gains: It deals with gains due to transfer of assets. The duration of holding determines the classification of the asset, which then decides the method of taxation. Capital assets held for 36 months (12 months in case of shares/securities) are taken as short term assets, while all other capital assets are taken as long term capital assets. Long term assets have the advantage of lower rate of tax. Income From Other Sources: It is the remaining category of income and takes care of all income not covered by any category. Foreign Nationals The tax law in India allows for exemption of income earned by foreign nationals for services provided in India, under certain condition: †¢ †¢ †¢ †¢ †¢ †¢ †¢ †¢ Remuneration from a foreign enterprise not conducting any business in India, provided the individual’s stay in India does not exceed 90 days and the payment made is not deducted in computing the income of the employer; Remuneration received by a person employed on a foreign ship provided his stay in India does not exceed 90 days; Remuneration of foreign diplomats, consular staff, trade officials and their staff and family; and Income of an employee or consultant of a government approved foreign charitable institutions. Payment from an International unit not having any business in India on condition that the individual does not reside in India for more than 90 days and the remuneration made is not subtracted in calculating the income of the employer. Payment obtained by a person working on an International ship under condition he does not reside in India for more than 9 days. Payment for foreign diplomats, consular staff, trade officials and their staff and family and Earnings of an employee or consultant of a government approved foreign charitable institutions. India Budget 2008 Personal Taxation Basic Tax Rates Income (INR) Up to 150,0000 150,001-300,000 300,001-500,000 Above Tax Rate Nil 10% 20% 30% *Basic exemption for women and senior citizens will be INR 180,000 and INR 225,000 respectively. Wealth Taxation In India The wealth taxation in India is known as the wealth tax act, 1957. It applies to all the citizens of the country. It is one of the most important direct taxes. It is paid on the property ownership benefits. Till a person retains the ownership of a property, he or she has to pay wealth tax based on the prevailing market rate. Even if the property is not yielding any income, Wealth tax would have to be paid. Payment Procedures Of The Wealth Tax In India An Assessee is one who pays the wealth tax. An assessee can belong to any of the following categories: †¢ †¢ †¢ †¢ †¢ †¢ A Company. A Hindu undivided family. An Association of Persons or a Body of Individuals. Non corporative taxpayers. A dead person’s legal representative, the executor or administrator. A non resident’s agent. For a Hindu Undivided Family the tax is considered on the income derived from joint family collections. But for a non-corporative taxpayers, whose account is audited they have to pay the wealth tax according to the existing tax rate. Chargeability To Wealth Tax In India One of the main factors for a person to pay the wealth tax in India is the persons domicile status. According to the act, the domicile status of the assessee and the domicile status of the same needed for payment of the Income Tax must remain similar. Another factor based on which wealth tax is computed is the status of the assessee, whether he is a citizen or a non citizen. For citizens the wealth of the person within India is taxed, while for non citizens the wealth of the person within India is taxed, while the wealth located outside India is not taxed. Assets On Which Wealth Tax Is Charged The assets on which wealth tax is chargeable in India are: †¢ †¢ †¢ †¢ †¢ †¢ Residence like guesthouse, residential house, urban farmhouse and commercial property. Automobile for personal use. Precious items like jewelry, bullion, furniture, utensils. Yachts, boats and aircrafts used for non commercial purposes. Urban land under the authority of municipality or cantonment board having a population of, 10,000 and more. If the cash in hand is more than Rs 50000 for individuals and Hindu Undivided Families. Indirect tax Charge levied by the State on consumption, expenditure, privilege, or right but not on income or property. Customs duties levied on imports, excise duties on production, sales tax or value added tax (VAT) at some stage in production-distribution process, are examples of indirect taxes because they are not levied directly on the income of the consumer or earner. Since they are less obvious than income tax (because they don’t show up on the wage slip) politicians are tempted to increase them to generate more state revenue. Also called consumption taxes, they are regressive measures because they are not based on the ability to pay principle. Indirect Tax System India Indirect Taxes Pre Reforms The indirect tax structure was extremely irrational between the reforms. The Constitution gives the permission to levy a multitude of indirect taxes. But the most important ones are customs and excise duties charged by the Central government and sales tax excepting inter state sales tax to be charged by the state government. The indirect taxes levied by the centre like customs, excise and central sales tax and the major indirect taxes levied by the states and civic bodies like passenger and goods tax, electricity duty and octroi when taken together did not present a rational system. Indirect Taxes Post Reforms †¢ †¢ †¢ Even post reforms, the indirect tax regime in India is still in the early stages of growth. Both the Central and State governments charge a multitude of indirect taxes. The central government charges tax on goods at the point of import (Customs duty), manufacture (Excise duty), inter state sales (Central sales tax or CST) and on provision of services (Service tax). The state governments charge tax on goods sold within the state (Sales tax/Value Added Tax or VAT), and on the goods that enter the state (Entry tax). In the present scenario corporate would have to analyze the tax cost involved in a transaction, have enough backup documentation to support their tax positions and keep looking for ways for tax maximization. India Budget 2008 Indirect Taxes As per the Ministry Of Finance there has been significant development in planning for introducing the goods and services tax (GST) from April 1 2010. As a first step the rate of central sales tax (CST) is under proposal to be decreased to 2 per cent from April1 2008. The general rate of central value added tax (CENVAT) has been decreased from 16 per cent to 14 per cent across all goods. Custom Duties Customs regulation in India is through the Customs act. The Customs act came into existence in 1962 at a time when the â€Å"License Quota Permit Raj† system existed in the country. It came into existence to check illegal imports and exports of goods. All imports into the country would be charged a duty, to give protection to the Indian industries and to check the amount of imports with a view to secure the exchange rate of the country. Customs duty on goods imported or exported from India are levied according to the Tariff Act 1975. To monitor imports and exports, the Central government has the authority to inform the ports and airports for the unloading of the imported goods and loading of the exported goods, the location for clearance of goods imported or exported, the routes by which above goods may pass by land or inland water into or out of Indian ports. According to the custom laws, the following are the various types of duties which can be charged. Basic Duty As the name suggests, it is the normal duty charged under the Customs Act. Additional Duty This duty is levied under section 3(1) of the Customs Tariff Act and is equal to excise duty levied on a like product manufactured or produced in India. Anti Dumping Duty International sellers may at times export goods into India at prices which would be less than the prices they would be charging in their domestic market. The reason for this is to capture the Indian markets, which is against the interest of the Indian industry. This economic phenomenon is called dumping. To avoid dumping the Central government may charge additional duty equal to the margin of dumping on such articles provided the goods have been sold at less than normal price. Countries which are signatories to the GATT or countries with â€Å"Most Favored Nation Status† cannot be charged dumping duty. India Budget 2008 Custom Duty †¢ †¢ †¢ The peak rate of basic customs duty (BCD) on all agricultural products is 10 per cent. For certain industries, customs duty has been reduced. For project imports the duty has been reduced from 7. 5 per cent to 5 per cent. In place of sales tax/value added tax (VAT) the additional duty of customs at 4 per cent has been induced on power generation projects. A Countervailing Duty (CVD) of 1 per cent has been charged on mobile phones. Double Taxation Relief A condition in which two or more taxes may need to be paid for the same asset, financial transaction or income is known as double taxation. It generally takes place due to the overlapping of the tax laws and regulations of different countries. Thus, double taxation occurs when a taxpayer is charged income tax, both at his country of residence as well as in the country where the income is generated. Taking into account the laws of income tax in India, a non-resident becomes liable to tax payment in India, given that it is the place where the income is generated. Moreover, he has to additionally bear the burden of tax payment in his own country, by virtue of the inclusion of the same income in the ‘total world income’, which forms the tax base of the country where he resides. To effectively deal with the problems related to double taxation, Central Government, under Section 90 of the Income Tax Act of1961, has been certified to enter into Double Tax Avoidance Agreements (DTAA) with other countries. These agreements are meant to alleviate various problems related with double taxation. So far, India has entered into Double Taxation Avoidance Agreements with 65 countries, including U. S. A, Canada, U. K, Japan, Germany, Australia, Singapore, U. A. E and Switzerland. The tax treatises offers relaxation from double taxation, by providing release or by providing credits for taxes paid in one of the countries. Under Section 90 and 91 of the Income Tax Act, relief against double taxation in India is provided in two ways: Double Taxation Relief In India Double taxation relief in India is of two type’s Unilateral relief and Bilateral relief. Unilateral Relief Under Section 91, Indian government can relieve an individual from burden of double taxation, irrespective of whether there is a DTAA between India and the other country concerned or not, under certain conditions. Cases where a person enjoys double taxation relief as per the unilateral relief scheme are: †¢ †¢ †¢ †¢ If the person or company has been a resident of India in the previous year. If the person or company has paid income tax under the laws of the foreign country. The same income should be gained and received by the tax payer outside India in the previous year. The income should have been taxed in India and in a country with which India has no tax treaty Bilateral Relief Under Section 90, Indian government provides protection against double taxation by entering into a mutually agreed tax treaty (DTAA) with another country. Under bilateral relief, protection against double taxation is provided either by completely avoidance of overlapping tax or waiving a certain amount of the tax payable in India. Excise Duty Central excise duty is an indirect tax which is charged on such goods that are manufactured in India and are meant for domestic consumption. The taxable fact is â€Å"manufacture† and the liability of central excise duty arises as soon as the goods are manufactured. The tax is on manufacturing, it is paid by a manufacturer, which is then passed on to the customer. The term â€Å"excisable goods† means the goods which are specified in the First Schedule and the Second Schedule to the Central Excise Tariff Act 1985. The term â€Å"manufacture† refers to any process †¢ †¢ †¢ Related or supplementary to the combination of a manufactured product. Which is specified in relation to any goods in the Section or Chapter Notes of the First Schedule to the Central Excise Tariff Act 1985 as amounting to manufacture or Which in relation to the goods specified in the Third Schedule involves packing or repacking of such goods in a unit container or labeling or re-labeling of containers including the declaration or alteration of retail sale price on it or adoption of any other treatment on the goods to render the product marketable to the consumer. Three different types of Central Excise Duties exist in India. They are listed below: Basic Excise Duty In India Excise Duty, imposed under section 3 of the ‘Central Excises and Salt Act’ of1944 on all excisable goods other than salt produced or manufactured in India, at the rates set forth in the schedule to the Central Excise tariff Act, 1985, falls under the category of Basic Excise Duty In India. Additional Duty of Excise Section 3 of the ‘Additional Duties of Excise Act’ of 1957 permits the charge and collection of excise duty in respect of the goods as listed in the Schedule of this Act. This tax is shared between the Central and State Governments and charged instead of Sales Tax. Special Excise Duty According to Section 37 of the Finance Act, 1978, Special Excise Duty is levied on all excisable goods that come under taxation, in line with the Basic Excise Duty under the Central Excises and Salt Act of 1944. Therefore, each year the Finance Act spells out that whether the Special Excise Duty shall or shall not be charged, and eventually collected during the relevant financial year. India Budget 2008 Excise Duty †¢ †¢ †¢ †¢ †¢ The general rate of CENVAT has been brought down from 16 per cent to 14 per cent. The CENVAT on many goods like cars, writing paper, printing paper and packing paper, drugs and pharmaceuticals, water filtration and purification devices, pan masala not containing tobacco etc have been decreased. For goods like anti AIDS drugs and bulk drugs, packaged tender coconut water, tea and coffee mixes, specified refrigeration equipment, etc have been exempt from excise duty. For packaged software the duty has been increased from 8 per cent to 12 per cent. The duty of 1 per cent on National Calamity and Contingent Duty has been imposed on mobile phones. Permanent Account Number (PAN) Permanent Account Number or PAN is issued by the Income Tax Office of India, to all those who are required to pay income tax in the country. Thus, taxpayers whose income is taxable are issued a Permanent Account Number, which is similar to the Social Security Number issued in United States to citizens and other legal residents. So, PAN in India is nothing, but a national identification number. The main purpose of allotting PAN card is to outline the monetary transactions of individuals and to avert any sort of tax evasion by tax payers. Apart from keeping a track on the various financial dealings of a person, a PAN is also required for many other important activities. As every individual is assigned a unique, national and permanent number as his/her PAN, the number is required while opening an account, applying for a phone line, receiving salary or other professional fees. Thus, it becomes an authentic document, proving the identity of the individual. The PAN of a person remains the same even if there is residential change of address from one state to another. Each individual entitled to a Permanent Account Number receives a PAN card, wherein the number is mentioned. The PAN follows the following structure – XXXXX1111X. The first five characters are letters; the next 4 are numerals, and the last character is again a letter. A Permanent Account Number that doesn’t follow this pattern is deemed as invalid. Moreover, the fourth character of the PAN is one of the following, depending on the type of assessee who is allotted the number. †¢ †¢ †¢ †¢ †¢ †¢ †¢ †¢ †¢ †¢ C – Company P – Person H – Hindu Undivided Family (HUF) F – Firm A – Association of Persons (AOP) T – AOP (Trust) B – Body of Individuals (BOI) L – Local Authority J – Artificial Juridical Person G – Government In addition, the fifth character of the PAN is the first character in the surname of the assessee. Though PAN is generally issued to individuals to keep track of the tax payment, it can however also be issued to non-taxpayers in India. Sales Tax In India Sales Tax in India is a form of tax that is imposed by the government on the sale or purchase of a particular commodity within the country. Sales Tax is imposed under both, Central Government (Central Sales Tax) and State Government (Sales Tax) Legislation. Generally, each state follows its own sales tax act and levies tax at various rates. Apart from sales tax, certain states also imposes additional charges like works contracts tax, turnover tax and purchaser tax. Thus, sales tax acts as a major revenuegenerator for the various State Governments. Sales tax is an indirect form of tax, wherein it is the responsibility of the seller of the commodity to collect and recover the tax from the purchaser. Generally, sale of imported items and sales by way of export are not included in the range of commodities which requires payment of sales tax. Moreover, luxury items (like cosmetics) are levied heavier sales tax rates. Central Sales Tax (CST) Act that falls under the direction of the Central Government takes into account all the interstate sales of commodities. Thus, sales tax is to be paid by every dealer on the sale of any commodity, made by him during inter-state trade or commerce, irrespective of the fact that no liability to pay tax on the sale of goods arises under the tax laws of the appropriate state. He is to pay sales tax to the sales tax authority of the state from which the movement of the commodities commences. However, from April 01, 2005, most of the states in India have supplemented sales tax with a new Value Added Tax (VAT). The practice of VAT executed by State Governments is applied on each stage of sale, with a particular apparatus of credit for the input VAT paid. VAT in India can be classified under the following tax slabs: †¢ †¢ †¢ †¢ †¢ 0% for essential commodities 1% on gold ingots and expensive stones 4% on industrial inputs, capital merchandise and commodities of mass consumption 12. 5% on other items Variable rates (state-dependent) are applicable for petroleum products, tobacco, liquor etc. Service Tax in India Constitutional Provision Article 265 of the Constitution stresses that no service tax in India shall be charged or collected other than by the concerned authority. Schedule VII divides this subject into three different sections †¢ Union list (only Central government has power of legislation). †¢ †¢ State list (only State government has power of legislation). Concurrent list (both central and state government can pass legislation). An amendment (95th amendment) in 2003 was made to enable the Central government to decide the method of charging service tax and the means of collection of proceeds by the central government and state government. Subsequently a new article 268 A has been introduced for levy of service tax by Central government. Creation Of DGST The department of Director General (Service Tax) was created in 1997 to handle the huge workload resulting due to the increasing importance of service tax. The Director General (Service Tax) is in charge of the department and his role and authority are: †¢ †¢ †¢ †¢ .

12 Angry Men By Reginald Rose - 1450 Words

An issue that has been circulating is whether or not to conform. Rob Siltanen says, â€Å"... The ones who see things differently. They re not fond of rules. And they have no respect for the status quo. You can quote them, disagree with them, glorify or vilify them. About the only thing you can t do is ignore them. Because they change thing.[...]† ( cited) What he says is agreeable because the one that does not conform, will be the one that changes themselves,their society and even their future. This matter is an open topic of debate because one may agree that an individual does not need to conform to society s ideals in order to find their happiness or be successful in life. When an individual chooses to not conform, it will lead them to their future and their own accomplishment. In the play,12 Angry Men, by Reginald Rose, readers can understand that one do not have to conform to what is the majority but an individual could be successful with their own action and thoughts. Juror 8 uses pathos to defend the boy by arguing, â€Å"Look, this boy s been kicked around all his life. You know - living in a slum, his mother dead since he was nine. He spent a year and a half in an orphanage while his father served a jail term for forgery. That s not a very good head start. He had a pretty terrible sixteen years. I think maybe we owe him a few words. That s all† (Rose 5). Juror eight states that he cannot condemn a fellow human being to the death sentence without first talking aboutShow MoreRelatedAnalysis Of 12 Angry Men By Reginald Rose731 Words   |  3 Pagesteachers of the English Department. I am very thankful for you to invite me to talk to you to day. As a student, we don t look forward to assignments based on boring novels or books that just don t captivate our attention. But the book by Reginald Rose, ’12 Angry Men’, on the other hand, is a story that fascinates and compels us. As well as being an entertaining book it is also an informative book. It goes through the legal system, the role of jurors, what to expect to come at you at the deliberationRead More12 Angry Men by Reginald Rose907 Words   |  4 Pagesliterary element setting includes the time when the story happens and location where the story takes place. Some stories use variety of settings to initiate an interesting beginning. However, the 12 Angry Man has only one fixed setting – the jury room, which is not commonly used in a novel. The author, Reginald Rose, overcomes the limitation in setting by describing changes in weather, initiating different types of character and imitating the events of the murder. First of all, the author overcomes theRead MoreSummary Of 12 Angry Men By Reginald Rose1681 Words   |  7 PagesJoshua Bennett American Literature 7-27-14 12 Angry Men by Reginald Rose Plot Development of Act 1 In Act 1 of 12 Angry Men, all the jurors were introduced and the trial was revealed to us. There were twelve jurors that were trying a teenage boy who was accused of murdering his father. The scene was set in a jury room in the New York City Court of Law on a hot summer day in 1957. Before the voting started, the judge stated that for the boy to be found guilty and receive the death penalty, thereRead MoreAnalysis Of 12 Angry Men By Reginald Rose Essay1845 Words   |  8 Pages12 Angry Men The drama play/film, 12 Angry Men, written in 1957 by Reginald Rose, is about concerns that arise in a homicide trial of an 18 year old inner city teen, who was accused of stabbing his father to death. As the arguments of the trial closed, the 12 members of the jury prepare to put careful thought into a decision, with a guilty verdict sentencing the teen to death. As a unanimous decision is attempted to be reached while in isolation together, juror member 8 expresses sincere doubt inRead MoreAnalysis Of The Play 12 Angry Men By Reginald Rose1082 Words   |  5 PagesFeature Article Prejudice is like a ghost, it has been haunting the human race since the very beginning. Maddison Hinte investigates the way prejudice affects our society by changing our views of others and the way we treat them. The play ‘12 angry men’ by Reginald Rose discusses that we shouldn t judge people on their background, on their style, or on their religion, instead we need to focus on what matters most, what’s on the inside. Literature both teaches and encourages us to question the issue ofRead MoreTwelve Angry Men1296 Words   |  6 Pagesbeen accused of murdering his father. On April 14th, 1951, Reginald Rose, a thirty-one-year-old army veteran published his second, and most prominent dramatic work entitled Twelve Angry Men. This play is now admired as a momentous, eloquent and critical examination of the United States jury system. Twelve Angry Men examines key courtroom themes including civil duty and reasonable doubt. Through the voice of these twelve men, the audience must ask themselves imperative questions regardingRead MoreThe Twelve Angry Men Juror 3 and Juror 8 Comparing Essay1919 Words   |  8 PagesComparison essay comparing Juror 3 and Juror 8 What are some similarities between Jurors 3 and 8? What about differences? Oh gosh, its been years since Ive seen the movie (didnt read the play).   Okay,  Juror  #3 is the angry father, and Juror #8 is the guy who stands alone in the INNOCENT vote, right? I suspect the similarities are easier to find by reading the play because the movie really shows their contrasts. There is one similarity in that when they really believe something, theyRead MoreJuror Eight In Twelve Angry Men By Reginald Rose776 Words   |  4 PagesPicture a room with a large table in the center. There is a door, but it is locked. Filling up all the twelve seats around the table, there are twelve men: jurors debating the murder of a man living near the el tracks. The man’s son is his alleged killer, but one juror is not convinced. This image is from Twelve Angry Men, a play written by Reginald Rose. The Eighth Juror is being fair to the child, explaining how there are many â€Å"what-ifs† in the situation. Juror Eight brings up many different piecesRead MoreStereotyping in the World is the Universal Message of 12 Angry Men505 Words   |  3 Pagesâ€Å"Stereotyping in the World† today has become a greater and greater problem has history moves on. Some have been known to look past these cases such as Reginald Rose’s book Twelve Angry Men. The play has been shown that one voice can change the thoughts of many by getting past the first layer and breaking it down to their inner person. Twelve Angry Men has showed the theme of â€Å"Stereotyping in the World† through the characters’ proper reasoning, communicating, and believing in good faith. For instanceRead MorePrejudice, Prejudice And Prejudice1190 Words   |  5 Pagestheir inability to look at things objectively, it becomes hard for them to consider the facts of the situation as opposed to looking at things with their discriminatory perspective. In 12 Angry Men and To Kill A Mockingbird, both authors effectively show how bias and prejudice can obscure the truth. In 12 Angry Men, Juror 10 and Juror 3 are shown as characters who find the boy on trial guilty due to their narrow mindedness and/or bigotry. Juror 10 believes that the boy is guilty due to the bias he